WAN Settings

This page contains multiple tabs for

1. WAN Settings,
2. MGT Settings,
3. VLAN Settings, and
4. Local DNS.

Any changes made on a tab must be saved using the Save button prior to changing tabs or to a different menu page.

Wan Settings

The card supports three options for Network Type

1. DHCP (Default)
2. Static
3. PPPoE

DHCP Address

• Type: DHCP (default), Static, or, PPPoE. (This is typically changed to Static after initial configuration.)
• IP Address: When set to DHCP, the IP Address of the card cannot be configured.
• Subnet Mask: When set to DHCP, the Subnet Mask of the card cannot be configured.
• Default Gateway: When set to DHCP, the Default Gateway of the card cannot be configured.
• Primary DNS: The Primary DNS of the card is set to 8.8.8.8  or can be configured.
• Secondary DNS: The Secondary DNS of the card is set to 8.8.4.4  or can be configured.
• Manage Access: Controls the ability to manage the card from either of the WAN or MGT IP Address interfaces (default) or just from the MGT interface.  The MGT interface must be configured before it can be used - see below).

Static IP Address

• Type: DHCP (default), Static, or, PPPoE. (This is typically changed to Static after initial configuration.)
• IP Address: When set to Static, the IP Address of the card must be configured.
• Subnet Mask: When set to Static, the Subnet Mask of the card must be configured.
• Default Gateway: When set to Static, the Default Gateway of the card must be configured.
• Primary DNS: When set to Static, the Primary DNS of the card is set to 8.8.8.8  or can be configured.
• Secondary DNS: When set to Static, the Secondary DNS of the card is set to 8.8.4.4  or can be configured.
• Manage Access: Controls the ability to manage the card from either of the WAN or MGT IP Address interfaces (default) or just from the MGT interface.  The MGT interface must be configured before it can be used - see below).