Galaxy Expand/Express - PRI-1 System Menu Page

1.0 System Settings

1.1 System Status

On the System Status page, you will find Interface and Channels status, as well as SIP, IAX2 , Routingand Network Information.


Interface Status: Shows the status of the port. Values are OK or Down.:
OK: the trunk connected to the port is available
Down: there is no trunk connected.
(Note that the diagram shows a North American 24 channel configuration.)

Channels Status: Shows the status of the individual channels within the trunk connection. Values are Idle, BusyDisbale, or S channel.
Idle: channel is available
Busy: channel is busy
Disable: the channel is unavailable
S Channel: the channel is used for signaling

1.2 Call Status

The Call Status page provides additional details of the active calls on the channels.




System Time: Shows the current value of the System Time
Time Zone: Choose the world time zone setting for your location
POSIX TZ String: Shows the equivalent Posix timezone string
NTP Server 1, 2, 3: Time Server domain or hostname (You can also set NTP Server 1 to be the address of the UCX.)
Auto-Sync from NTP: Choose whether to enable or disable the automatic synchronization with the NTP server (On/Off)
Sync from NTP: Click this button to orce the system to synchronize with the designated NTP server
Sync from Client: Click this button to synchronize the time from local machine

1.4 Login Settings

You may modify login parameters for web browser access and SSH access. You can also disable SSH access.


User Name: Defines the login user name to manage all aspects of the card.
Allowed characters “-_+<>&0-9a-zA-Z”; Length:1-32 characters.
Password: Changes the password value.
Allowed characters "-_+. <>&0-9a-zA-Z"; Length: 4-32 characters.
Confirm Password: Confirm the same password as 'Password' above.
Login Mode: Specify the web login mode: http and https or only https. Default is http and https.
Port: Specify the web server port number. Do not use port 443 (reserved for HTTPS).
Save: Save the updated settings.

1.5 General


The default language setting is English.

Scheduled Reboot

You may enable or disable the ability to schedule automatic reboots for the system.


Enable: ON - enable or OFF - disable this function 
Reboot Type: By DayBy WeekBy Month, or By Running Time
Time: The time setting for when the scheduled Reboot will occur (values based on Reboot Type: Hour of Day, Day of Week, Day of Month, Number of Days and Hours)
Save the updated settings.

1.6 Tools

Reboot Tools

Click the button representing the type of reboot you wish to perform; System Reboot or Asterisk Reboot. Click OK  to confirm.


System Reboot: This will momentarily turn off the PRI-1 Card and turn it back on and will cause all calls to drop
Asterisk Reboot: Will restart the Asterisk componenet of the system, and will cause all calls to drop.

Update Firmware

Use this section to update the firmware on the PRI-1 Card. This update should only be performed as advised by E-MetroTel support.

Upload and Backup Configuration

If you want to update your system but remtain your current configuration, use the Backup Configuration to create and download a current backup, update your system, and then choose Upload Configuration and choose the backup file you just downloaded.

Restore Configuration

Restore Configuration  will reset the system back to factory default values.

1.7 Information

The Information page provides details of the model name, firmware version, firmware build, hardware version, number of ports available (1), storage and memory utilization, and kernal build date. It also provides system up-time and the current system time.
Memory Clean Is a tool for manually clearing the cache and is not normally required.

Page Tags: