Set Based Configuration

This feature allows the user to complete the configuration of a phone using a simple procedure performed on the phone.

This feature is available to E-MetroTel XStim phones, InfinityOne soft phones and Nortel phones only.

Configuring a phone with a Display screen and a CONFIG soft key

Plug the set in and the display should have a soft key labeled Config. Follow these steps to finish the installation from the set:

  1. Press the Config Key or lift the phones hand set or press the DN key
  2. The display will prompt for a password, enter the Set Based Configuration Password and press the Enter soft key (or enter the Set Based Configuration Password followed by #)
  3. The display will prompt for an extension, enter the sets' extension and press the Enter soft key (or enter the sets' extension followed by #)
  4. The set will be automatically configured with the information from the extension matching the one entered

Configuring a phone with no Display screen or no CONFIG soft key

Plug the set in and follow these instruction to finish installing the set:

  1. Lift the phones hand set or press the DN key
  2. Enter the Set Based Configuration Password followed by #
  3. Enter the sets' extension followed by #
  4. The set will be automatically configured with the information from the extension matching the one entered

 

Page Tags: 
sbc
set based
phone install