Power down the UCx50E and unplug all cables from the box.
Remove the top cover from the UCx50E by removing 4 screws located at the 4 corners.
Remove the metallic plate holding the (SSD) hard drive by removing 4 silver screws located in the 4 corners of the plate.
The UCx50E is now ready for the next step.
The SSD is attached to the metallic plate. First unplug the two connectors from the SSD.
Loosen the 4 screws holding the SSD to the metallic plate .
Replace it with the new SSD, secure with the original 4 screws. Plug the 2 connectors back into the SSD.
Place the metallic plate with the SSD back into the UCx box and secure with the original 4 silver screws.
Place the top cover back onto the UCx box and secure with the original 4 black screws.
Power up the UCx server.