The VmX Locator feature provides a "mini-IVR" for each voicemail that is enabled for an extension.
This feature must first be enabled by the UCx administrator, then each user can configure their own options from the User Portal.
You need the following information to access the User Portal (For more details see User Extension Portal):
To access the configuration page for VmX Locator, perform the following steps:
You need to configure the following parameters for this feature to work.
Field
|
Description
|
---|---|
Use When | You can choose to apply the VmX Locator feature when unavailable or busy or both, by selecting the appropriate checkboxes |
Voicemail Instructions |
Check this box if you want the Standard voicemail prompts to be played after your personal greeting. If left uncheck, the caller will simply get a "beep" after your personal greeting. |
Go To Operator |
If this box is checked, the Press 0 field is disabled. When the caller presses 0, call will be sent to the Operator number configured for the whole system by the system administrator. NOTE: You do not need to enable VmX Locater for the "dial 0" operator feature to work. |
Press 0 |
To configure a different number for the Press 0 option, you have to first uncheck the Go To Operator field. This is typically used to overwrite the system operator number in certain scenarios where an executive might prefer to have the call go to the secretary. |
Send to Follow-Me |
If this box is checked, the Press 1 field is disabled. When the caller presses 1, call will be routed according to your Follow Me list. |
Press 1 |
To configure a number for the Press 1 option, you have to first uncheck the Send to Follow-Me field. You can enter any extension, queue, ringgroup or external number (e.g. your cell phone). |
Press 2 |
To configure a number for the Press 2 option. You can enter any extension, queue, ringgroup or external number (e.g. your cell phone). |