Define Ports

The Define Ports page allows you to create, edit, or delete ports for the firewall.

To view the list of defined ports, perform the following steps:

  1. Open the UCx Web-based Configuration Utility
  2. From the Security tab, select Firewall
  3. From the left side column, select Define Ports
  4. Press the Show Filter button to filter the list based on Name or Protocol
  5. Press the Show button to generate an updated list based on the filter

Update Ports

Click on the Update Ports button and the following list of port numbers will be updated to the current system configuration: 

  • AMI 
  • SSH 
  • IAX2 
  • RTP 
  • SIP 
  • UNISTIM

The following diagram shows the default ports for a newly installed R6.0 system. If your system was upgraded from a previous release, the existing defined ports are retained and the new R6.0 defaults will not be in the list.

Adding a Port Definition

To define a new port or a port range, perform the following steps:

  1. Open the UCx Web-based Configuration Utility
  2. From the Security tab, select Firewall
  3. From the left side column, select Define Ports
  4. Press the Define Port button
  5. Fill in the fields.  For a single port, enter the port number in the left field only.  For a port range, enter the first and last port number.
  6. Press the Save button to save the new definition

Editing a Port Definition

To edit a port definition, perform the following steps:

  1. Open the UCx Web-based Configuration Utility
  2. From the Security tab, select Firewall
  3. From the left side column, select Define Ports
  4. Select the View link in the Option column
  5. Press the Edit button
  6. Update the desired fields
  7. Press the Save button to update the definition

Deleting a Port Definition

To delete a port, perform the following steps:

  1. Open the UCx Web-based Configuration Utility
  2. From the Security tab, select Firewall
  3. From the left side column, select Define Ports
  4. Select the checkbox on the left side of each port definition that you want to delete
  5. Press the Delete button to delete the definition(s)