E-MetroTel SIP Trunk E911 Registration

E-MetroTel SIP Trunks may be used on with UCX software running on any of the E-MetroTel provided platforms (Galaxy appliances, virtualized, or cloud offerings). Proper configuration of outbound DID information is critical to ensure that all emergency (i.e. 911) calls arrive at the 911 Public Safety Answering Point (PSAP) with a DID that is properly registered and corresponds to a valid/desired address for the emergency response team notification.

DID Registration for Emergency Response

First DID from E-MetroTel

When SIP trunks are initially provisioned for a customer, E-MetroTel automatically provides a new unique DID associated with the SIP trunks for that customer. This is to ensure that customers can make and receive calls even if there are delays in the porting of any of the customer's existing DIDs from the existing PSTN provider(s). This new DID is automatically registered with the 911 PSAP and associated with the customer address in the PSAP database.

Customer DIDs Ported to E-MetroTel SIP Trunks

If the customer intends to use any additional DID information from their ported numbers to be sent on outbound emergency calls, then each of these DIDs and their associated address/location information must be properly commercially registered with the PSAP via E-MetroTel. Failure to do so will result in the emergency call center not having an address for dispatching the responders and will cause delays in their response time. Furthermore, calls arriving at the PSAP with an unregistered DID will result in a fine/service charge to the customer and/or reseller and may be in violation of the local emergency response regulations.

Programming for DIDs Registered with the PSAP Provider

UCX software provides significant flexibility in which DID is sent to the PSAP provider, ranging from sending a single DID for all calls to using unique DIDs for each individual user (if available).

If the customer has only a single location and does not have any additional trunks or DIDs other than the first one provided through the E-MetroTel SIP Trunk purchase, then standard programming to use that DID on all outbound calls is sufficient, as the E-MetroTel SIP trunks will have that initial DID registered with the PSAP provider.

For all other scenarios such as cases where a customer may have more than one address being served by the same SIP trunks, a campus environment where the customer may want to be able to have emergency response teams arrive at different buildings within the campus, or where remote users have their own DIDs, specific UCX configuration is required and registration of those DIDs with the PSAP provider via E-MetroTel is also required. Requirements for these scenarios may be governed by local regulations such as Kari's Law and the Ray Baum Act, which can place the responsibility and liability for proper configuration and registration with the reseller.

Reference the following E-MetroTel documentation for configuring these scenarios:

Page Tags: 
Partner
ticket
tickets
support
helpdesk
portal
Reseller