Fax to Email

Each extension can have the ability to receive faxes sent to their extension directly. A direct DID would typically be associated with an extension that has the fax ability enabled.

Open the UCx Web-based Configuration Utility

1. From the PBX tab, select PBX Configuration
2. From the left side column, select Extensions
3. From the list on the right hand side, select the extension that you want to configure Fax
4. Scroll down to the Fax section
5. Check the Enabled box to allow the extension to receive faxes
6. Enter the email address in Fax Email, this is the email that will be receiving the faxes
7. Select the Attachment Format, incoming faxes will be converted to this format before it is emailed to the recipient