Here are the basic steps required to register the phone to the UCx server.

Create Profile

Login to the web interface and perform the following steps to first create a Profile:

1. Navigate to the Profile - Basic page.
2. Select the desired profile from the Profile drop-down list.
3. Enter the IP address of the UCx Server in the Primary SIP Server field, e.g. 192.168.1.200.
   If the server is NOT using the default port number 5060, then append the port number to the server address, e.g. 192.168.1.200:5678.
4. Verify the SIP Transport is UDP.
   
5. Click on the SaveSet button.

Create Account

Next step is to create and register the SIP account:

1. Navigate to the Account - Basic page.
2. Select the desired account from the Account drop-down list.
3. Set Account Active to Yes.
4. Select the desired profile from the Profile drop-down list.
5. Populate the following fields:
   • Label - A name for the account
   • SIP User ID - User Extension
   • Authenticate ID - User Extension
   • Authenticate Password – Secret
   • Name - Display Name
6. Enter *97 in the Voice Mail UserID field to allow access to the user's voicemail box by pressing the Message key.
7. Enter ** in the Direct Call Pickup Code field to allow call pickup using the BLF key.
8. Click on the SaveSet button.